Facebook



Join our mailing list!




You are here:Home > Adapters > Trimble 250, 500 & FMX Adaptors
Trimble EZ Plus 500 adapter to use to get radar square waves to Planter or Spray Monitor, DICKEY-john, John Deere (AMP connector), Raven, Micro-Trak, and Hiniker Monitors. DB9 Connector have Female Pins and also a switch to turn the signal to pin 2 or 3 output
Sort By:
Page of 1
DS-TRIM250-D DS-TRIM250-R
Starting at: $60.50
Starting at: $60.50
DS-TRIM250-D DS-TRIM250-R
EZ-Guide 250 Speed Output Adapter to DICKEY-john or John Deere Plug EZ-Guide 250 SPeed Output Adapter to Raven Monitor
DS-TRIM250 - "H" Connector 12PDY-D
Starting at: $60.50
Starting at: $115.50
DS-TRIM250 - "H" Connector 12PDY-D
EZ-Guide 250 Speed Output Adapter to DICKEY-john or John Deere Plug This cable will allow you to hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a 4 pin AMP connector. It has a male and female Deutsch connector to Y off of the back of the console. This allows you to split the port if there is already a connector plugged into it. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display.
12PDY-R ADTM06-D
Starting at: $115.50
Starting at: $67.00
12PDY-R ADTM06-D
This cable will allow you to hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a RAVEN connector. It has a male and female Deutsch connector to Y off of the back of the console. This allows you to split the port if there is already a connector plugged into it. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display. Hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a 4 pin AMP connector. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display.
ADTM06-R ADTM06-CT
Starting at: $67.00
Starting at: $67.00
ADTM06-R ADTM06-CT
Hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a RAVEN connector. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display. Hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a Caterpillar Tractor. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display.
ADTM06-TJ DS-EZP-H
Starting at: $67.00
Starting at: $67.00
ADTM06-TJ DS-EZP-H
Hook up your FMX, FM1000, CFX-750 or FM750 display to any planter monitor radar input with a TEE-JET connector. The cable length is 4ft long and plugs into the 12 Pin Deutsch connector on the back of the display. Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a Hinker Monitor. (Ground Pin 5 & Signal Pin 8)
DS-EZP-CIH DS-EZP-D
Starting at: $67.00
Starting at: $67.00
DS-EZP-CIH DS-EZP-D
Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a Case-IH Tractor w/ 4 Pin Weather-Pack Tower (Ground Pin 5 & Signal Pin 8) Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a Dickey-john or John Deere Monitor. (Ground Pin 5 & Signal Pin 8)
DS-EZP-JDT DS-EZP-M
Starting at: $67.00
Starting at: $67.00
DS-EZP-JDT DS-EZP-M
Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a John Deere Tractor w/ 4 Pin Weather-Pack Tower (Ground Pin 5 & Signal Pin 8) Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a Micto-trak Monitor. (Ground Pin 5 & Signal Pin 8)
DS-EZP-R
Starting at: $67.00
DS-EZP-R
Hook up your  Trimble EZ Guide 500 Monitor with this cable to get a Radar signal to a Raven Monitor. (Ground Pin 5 & Signal Pin 8)