Facebook



Join our mailing list!




You are here:Home > Sensors > Planter Sensors
Sort By:
Page of 1
IRPS-WP | Infrared Seed Flow Planter Sensor S1-IRGD
Starting at: $76.00
more info
Starting at: $76.00
more info
IRPS-WP | Infrared Seed Flow Planter Sensor S1-IRGD
This Planter Seed Flow Sensor are designed with 3 Infrared eyes. It is a seed-flow sensor that tells whether the row is planting or not. Sensors have WEATHER PACK Connectors ends.


The SENSOR-1 Grain Drill Seed Flow Sensors are field tested and constructed of solid-state electronics encased in an injection-molded plastic housing and protected by a special epoxy. The drill owner can choose between: two sensors on each end of the drill compartment to determine if ends are out of seeds and if the shaft failed to rotate; or one drill with sensors on each row to detect if a row is clogged. SENSOR-1 Grain Drill Sensors are adaptable to most types of drills.
DJ-Hy Rate Plus PS-3W | Seed Flow Planter Sensor
Starting at: $147.50
more info
Starting at: $65.00
more info
DJ-Hy Rate Plus PS-3W | Seed Flow Planter Sensor
The Hy Rate Plus™ LED Seed Sensor is the sensor of choice for all seed types regardless of size, shape and seeding rate. From larger seeds such as corn to small seeds like canola, the Hy Rate Plus accurately counts seeding population during planting, providing confidence that your row units are working properly and seeds are being placed for optimum yield potential.

Accurately monitors seeding rates between 1–135 seeds/sec across multiple seed types for uncompromised accuracy. Ability to distinguish doubles, triples and quad seed drops to maintain accurate population count
The SENSOR-1 Planter Seed Flow Sensors are designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. The Planter Sensor is a seed-flow sensor that tells whether the row is planting or not. Sensors have 33” leads with mate-n-lock connectors.

PS-WP | Seed Flow Planter Sensor PS3-WP | Seed Flow Planter Sensor (3" Lead)
Starting at: $65.00
more info
Starting at: $63.50
more info
PS-WP | Seed Flow Planter Sensor PS3-WP | Seed Flow Planter Sensor (3" Lead)
The SENSOR-1 Planter Seed Flow Sensors are designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. The Planter Sensor is a seed-flow sensor that tells whether the row is planting or not. Sensors have 33” leads with WEATHER PACK Connectors ends.


The SENSOR-1 Planter Seed Flow Sensors are designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. The Planter Sensor is a seed-flow sensor that tells whether a row is planting or not. Sensors have 3” leads with WEATHER PACK Connectors ends.


PS6-WP | Seed Flow Planter Sensor (6" Lead) PS-SS | Seed Flow Planter Sensor
Starting at: $63.50
more info
Starting at: $65.00
more info
PS6-WP | Seed Flow Planter Sensor (6" Lead) PS-SS | Seed Flow Planter Sensor
The SENSOR-1 Planter Seed Flow Sensors are designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. The Planter Sensor is a seed-flow sensor that tells whether a row is planting or not. Sensors have 6” leads with WEATHER PACK Connectors ends.


The SENSOR-1 Planter Seed Flow Sensors are designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. The Planter Sensor is a seed-flow sensor that tells whether the row is planting or not. Sensors have 60” leads with CANNON (sure seal) ends.

HRPS-WP | High Rate Population Planter Sensor (33" Lead) HRPS3-WP | High Rate Population Planter Sensor (3" Lead)
Starting at: $91.00
more info
Starting at: $91.00
more info
HRPS-WP | High Rate Population Planter Sensor (33" Lead) HRPS3-WP | High Rate Population Planter Sensor (3" Lead)
The SENSOR-1 Planter Population Sensor detects most types of seeds and it is recommended if you experience high dust and chemical residue problems. It is field tested and designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. (33 in Lead)

The SENSOR-1 Planter Population Sensor detects most types of seeds and it is recommended if you experience high dust and chemical residue problems. It is field tested and designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. (3 in Lead)

HRPS6-WP | High Rate Population Planter Sensor (6" Lead) HRPS12-WP | High Rate Population Planter Sensor (12" Lead)
Starting at: $91.00
more info
Starting at: $91.00
more info
HRPS6-WP | High Rate Population Planter Sensor (6" Lead) HRPS12-WP | High Rate Population Planter Sensor (12" Lead)
The SENSOR-1 Planter Population Sensor detects most types of seeds and it is recommended if you experience high dust and chemical residue problems. It is field tested and designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. (6 in Lead)

The SENSOR-1 Planter Population Sensor detects most types of seeds and it is recommended if you experience high dust and chemical residue problems. It is field tested and designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. (12 in Lead)

HRPS-3W | High Rate Population Planter Sensor (33" Lead) HRPS-SS | High Rate Population Planter Sensor (60" Lead)
Starting at: $91.00
more info
Starting at: $91.00
more info
HRPS-3W | High Rate Population Planter Sensor (33" Lead) HRPS-SS | High Rate Population Planter Sensor (60" Lead)
The SENSOR-1 Planter Population Sensor detects most types of seeds and it is recommended if you experience high dust and chemical residue problems. It is field tested and designed with solid-state electronics, encased in an injection-molded plastic housing and sealed with epoxy. (33 in Lead)

The SENSOR-1 Planter Population Sensor detects most types of seeds and is recommended if you experience high dust and chemical residue problems.

CIH-ERHR-WP DJ-DFS | Blockage Sensor for Fertilizer
Starting at: $125.00
more info
Starting at: $119.00
more info
CIH-ERHR-WP DJ-DFS | Blockage Sensor for Fertilizer
The SENSOR-1 Air Planter Population or Seed Flow Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece, injection-molded plastic housing and sealed with a special epoxy. This sensor is used on most air planters for Seed Flow or Population count. The Air Planter Sensor is designed for the Early Riser monitor with a high rate seed population of over 200,000. Superior blockage detection. Easy to install.
Detects all sizes of seeds, granular fertilizers, and pesticides. Use with air seeders or grain drills. Comes with a stainless steel insert for fertilizer.
DJ-DSS | Blockage Sensor HRGD-WP | High Rate Population Grain Drill Sensor
Starting at: $80.00
more info
Starting at: $115.00
more info
DJ-DSS | Blockage Sensor HRGD-WP | High Rate Population Grain Drill Sensor
Superior blockage detection. Easy to install.
Detects all sizes of seeds, granular fertilizers, and pesticides. Use with air seeders or grain drills. Get it with a stainless steel insert for fertilizer.
The SENSOR-1 Grain Drill Population Sensors have three infrared lights to provide the capability of monitoring high-rate population when drilling soybeans, or other types of seeds (this sensor can count wheat, at 95% accuracy). These drill sensors assure the best possible seed population.

Product Notes:
If you have rigid tubes, see MISC-750ADPA

APDS-WP | Seed Flow Grain Drill Sensor PSGD-WP | Seed Flow Grain Drill Sensor
Starting at: $80.00
more info
Starting at: $70.00
more info
APDS-WP | Seed Flow Grain Drill Sensor PSGD-WP |  Seed Flow Grain Drill Sensor
Grain Drill Seed Flow Sensor for Crust Buster
Sensor-1 Grain Drill Seed Flow Sensors are field tested and constructed of solid-state electronics encased in an injection-molded plastic housing and sealed with a special epoxy. These sensors are used on John Deere 750 Drills, 1994 or older, and Crust Buster Drills for seed flow and population. The Grain Drill Seed Flow Sensor is designed for single seed drop population count. This sensor is not accurate for multiple seed drop. The Grain Drill Seed Flow Sensor comes with Weather-Pack Connectors.

Product Notes: If you have rigid tubes, see
MISC-750ADPA
The SENSOR-1 Grain Drill Seed Flow Sensors with fit most Drill with 1/2" flex tubes. Great to see if ends boxes are out of seeds and if the shaft failed to rotate; or one drill with sensors on each row to detect if a row is clogged.

Product Notes: If you have rigid tubes, see
MISC-750ADPA
APHR-3W | High Rate Population Air Planter Sensor APHR-WP | High Rate Population Air Planter Sensor
Starting at: $96.00
more info
Starting at: $96.00
more info
APHR-3W | High Rate Population Air Planter Sensor APHR-WP | High Rate Population Air Planter Sensor
Air Planter Population Sensors
The SENSOR-1 Air Planter Population Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece. This sensor is used on most Case IH air planters for seed flow or population count. This Air Planter Sensor is designed for single seed drop for population count with a 3-Wire AMP Connector.
Air Planter Population Sensors
The SENSOR-1 Air Planter Population Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece. This sensor is used on most Case IH air planters for seed flow or population count. This Air Planter Sensor is designed for single seed drop for population count with a Weather-Pack Connector and 33" Lead.
APSF-3W | Seed Flow Air Planter Sensor APSF-WP | Seed Flow Air Planter Sensor
Starting at: $79.00
more info
Starting at: $79.00
more info
APSF-3W | Seed Flow Air Planter Sensor APSF-WP | Seed Flow Air Planter Sensor
Air Planter Seed Flow Sensors
The SENSOR-1 Air Planter Seed Flow Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece. This sensor is used on most Case IH air planters for seed flow or population count. This Air Planter Sensor is designed for seed flow with a 3-Wire AMP Connector and 33" Lead.
Air Planter Seed Flow Sensors
The SENSOR-1 Air Planter Seed Flow Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece. This sensor is used on most Case IH air planters for seed flow or population count. This Air Planter Sensor is designed for seed flow with a Weather-Pack Connector and 33" Lead.
DJ-LPS | Liquid Presure Sensor CIH-APSF-WP
Starting at: $1,123.50
more info
Starting at: $87.45
more info
DJ-LPS | Liquid Presure Sensor CIH-APSF-WP

Liquid Pressure Sensor
Measures 0-650 psi liquid pressure, can be used as an alternative to flow meter in a Land Manager® or CCS100 liquid sprayer control systems, reads liquid pressure at nozzle on spray bar. Prevents over-application caused by single nozzle clogs.

Product Notes: DICKEY-john Part Number: 46570-0020

The Case-IH Air Seed Flow Sensors are field tested and constructed of solid-state infrared electronics encased in a one-piece, injection-molded plastic housing and sealed with a special epoxy. This sensor is used on most air planters for Seed Flow.
DJ-CIHHRSENSOR DJ-HLSB | Hopper Level Sensor with Bushing
Starting at: $130.00
more info
Starting at: $142.50
more info
DJ-CIHHRSENSOR DJ-HLSB | Hopper Level Sensor with Bushing
SENSOR-1 1200 Planter Sensors for the 1200 Case IH Early Riser Planter are field tested and constructed of solid-state infrared electronics encased in a one-piece, injection-molded plastic housing. This sensor is used on most planters  for seed flow or population count. The sensor is designed for single or multiple seed drop for population count or seed flow. The connector for the 1200 Planter Sensor  is available in Weather-Pack Connector. Will not work with the ASM or AFS Monitoring system. DICKEY-john Hopper Level Sensor comes with 3 individual Weather-pack Connectors. It has a switch for High & Low capability to work with many Monitors such as DICKEY-john’s, Early Risers & Seed Flow II Monitors. Also has a 1/2 Bushing.

DJ Part # 466820721S1
DJ-HLS | Hopper Level Sensor DJ-UDS | Universal Distance Sensor
Starting at: $119.00
more info
Starting at: $565.00
more info
DJ-HLS | Hopper Level Sensor DJ-UDS | Universal Distance Sensor
DICKEY-john Hopper Level Sensor comes with 3 individual Weather-pack Connectors. It has a switch for High & Low capability to work with many Monitors such as DICKEY-john’s, Early Risers & Seed Flow II Monitors.

DJ Part # 46682-0720S3
CIH Part# 1336022C2
Universal Distance Sensor
DICKEY-john´s technology and durability delivers with a magnetic ground speed sensor kit designed for economy. Magnets capture wheel rotation speed. Easy attachment to vehicle axle and wheel. No need for sprockets or alignment with lug nuts. Kit includes sensor, 60 magnets, and muffler clamps
KPIIS | Kinze Planter Sensor DJ-ILS | Implement Lift Switch
Starting at: $136.00
more info
Starting at: $189.00
more info
KPIIS | Kinze Planter Sensor DJ-ILS | Implement Lift Switch
Uses "Smart" Sensor Technology which communicates on a 3-wire mux bus. Replaces sensors for the Kinze KPM II and Monosem MPM II planter monitors. Kinze II Planter Sensor without Tube for PM II Monitor.
Implement Lift Switch
Enables or disables implement function. Attaches to three-point hitch or lift cylinder. Ties to planter monitors and control systems. DICKEY-john part number: 46372-0150S1
DJ-USS | Universal Seed Sensor DJ-ARS | Application Rate Sensor
Starting at: $113.00
more info
Starting at: $286.00
more info
DJ-USS | Universal Seed Sensor DJ-ARS | Application Rate Sensor
Universal Seed Sensor
The new Universal Seed Sensor from DICKEY-john is a seed sensor that is tailored specifically for applications where there isn’t a lot of room for a bracketed seed sensor. The sensor utilizes the same proven technology that existing sensors use for superior seed detection, but is flexible enough to fit into many tight openings that were too small for other seed sensors.

DICKEY-john part number: DJ467701002S1
Measures shaft rotation speed, outputs at 360 pulses per revolution for increased accuracy, RPM range 2-2,500, easily adapts to 1 and 1 1/4 in. diameter shafts, and 12 volt sensor with square-wave signal output.

Comes with cable 1’ up to 30'  Part# for sensor w/1’ cable 46436-0177S1
DS-TGDS | Distance Press Wheel Sensor S1-CS | Cotton Sensor
Starting at: $95.00
more info
Starting at: $150.00
more info
DS-TGDS | Distance Press Wheel Sensor S1-CS | Cotton Sensor
Distance Press Wheel Sensors 7/8" Hexagon Hole or 1" Round Hole Gear. Also coming without bracket & Gear. Sensor-1 Cotton Sensor
Used on Case-IH 1844, 2022, 2044, 2055, 2155, 2555 Cotton Harvester.
DJ-APS | Air Pressure Sensor MISC-750ADPA
Starting at: $201.50
more info
Starting at: $7.50
more info
DJ-APS | Air Pressure Sensor MISC-750ADPA
Early Riser Air Presure Sensor Grain Drill Adapters for mounting the sensors to Tube or Metering Cup.